Allied-telesis AT-S95 CLI (AT-8000GS Series) Manuel d'utilisateur télécharger pdf (Page 270)

100

101

Page 270

Allied Telesis

AT-8000GS Command Line Interface User’s Guide

Parameters

•

hop-count—Number of hops in an MST region before the BDPU is discarded .(Range: 1-40)

Default Configuration

The default number of hops is 20.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the maximum number of hops that a packet travels in an MST region before it is

discarded to 10.

spanning-tree mst port-priority

The spanning-tree mst port-priority Interface Configuration mode command configures port priority for the

specified MST instance. Use the no form of this command to return to the default configuration.

Syntax

spanning-tree mst instance-id port-priority priority

no spanning-tree mst instance-id port-priority

Parameters

•

instance-ID—ID of the spanning tree instance. (Range: 1 - 15)

• priority—The port priority. (Range: 0 - 240 in multiples of 16)

Default Configuration

The default port priority for IEEE Multiple Spanning Tree Protocol (MSTP) is 128.

Command Modes

Interface Configuration (Ethernet, port-channel) mode

User Guidelines

There are no user guidelines for this command.

Example

The following example configures the port priority of port g1 to 142.

console(config) #

spanning-tree mst max-hops

console(config)#

interface ethernet

console(config-if)#

spanning-tree mst

port-priority

142

1 2 ... 265 266 267 268 269 270 271 272 273 274 275 ... 396 397

Commentaires sur ces manuels

Pas de commentaire

Allied-telesis AT-S95 CLI (AT-8000GS Series) Manuel d'utilisateur Page 270

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Allied-telesis AT-S95 CLI (AT-8000GS Series)