Allied-telesis AT-S94 CLI (AT-8000S Series) Manuel d'utilisateur télécharger pdf (Page 329)

100

101

System Management Commands

Page 328

Default Configuration

The automatically configured unit number is assigned.

Command Modes

Global Configuration mode

User Guidelines

This command is not relevant to standalone devices.

The command takes effect only after resetting the device.

Example

This example changes Unit Number 6 to Unit Number 5. The command takes effect only after resetting the device.

show stack

Note

This command is operational in the AT-S94/24, AT-S94/24POE, AT-S94/48 and AT-S94/48POE devices.

The show stack User EXEC mode command displays information about the status of a stack.

Syntax

show stack [unit unit]

Parameters

•

unit— Specifies the number of the unit. (Range: 1-6)

Default Configuration

This command has no default configuration.

Command Mode

User EXEC mode

User Guidelines

This command is not relevant to standalone devices.

Example

The following example displays stack status.

console#

config

console(config)#

stack change unit-id

console>

show stack

Unit MAC Address Software Master Uplink Downlink Status

1 2 ... 324 325 326 327 328 329 330 331 332 333 334 ... 401 402

Commentaires sur ces manuels

Pas de commentaire

Allied-telesis AT-S94 CLI (AT-8000S Series) Manuel d'utilisateur Page 329

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Allied-telesis AT-S94 CLI (AT-8000S Series)