Allied-telesis AT-S94 CLI (AT-8000S Series) Manuel d'utilisateur télécharger pdf (Page 166)

100

101

Page 165

Allied Telesis

AT-8000S-S94-3.0 Command Line Interface User’s Guide

Command Mode

Interface Configuration mode (VLAN, Ethernet, Port-channel)

User Guidelines

DHCP relay must first be globally enabled before enabling DHCP snooping on an interface.

Example

The following example enables Dynamic Host Configuration Protocol (DHCP) relay features for an interface.

ip dhcp relay address

The ip dhcp relay address Global Configuration mode command makes a DHCP server available for the DHCP

relay. Use the no form of this command to remove server from the list.

Syntax

ip dhcp relay address [ip-address]

no ip dhcp relay address [ip-address]

Parameters

•

ip-address —DHCP server IP address. Up to 8 servers can be defined.

Default Configuration

No server is defined.

Command Mode

Global Configuration mode

User Guidelines

There are no user guidelines for this command.

Example

The following example makes a DHCP server available for the DHCP relay.

show ip dhcp relay

The show ip dhcp relay User EXEC mode command displays the server address on the DHCP relay.

Syntax

show ip dhcp relay

console(config)#

interface ethernet

1/e6

console(config-if)#

ip dhcp relay enable

console(config)#

ip dhcp relay

1.1.1.10

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 401 402

Commentaires sur ces manuels

Pas de commentaire

Allied-telesis AT-S94 CLI (AT-8000S Series) Manuel d'utilisateur Page 166

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Allied-telesis AT-S94 CLI (AT-8000S Series)