Allied-telesis AT-S41 Manuel d'utilisateur télécharger pdf (Page 28)

AT-S41 User’s Guide

Starting a Local

Management

Session

To start a local management session, perform the following procedure:

1. Connect one end of the null modem management cable included

with the switch to the RS232 Terminal Port on a master of the stack.

The master switch has a Stack ID of 1. (The STACK ID LEDs on the front

of the switches will tell you which is the master switch of the stack.)

Figure 1 Connecting a Terminal or PC to the RS232 Terminal Port

2. Connect the other end of the cable to an RS232 port on a terminal or

a PC with a terminal emulation program.

3. Configure the terminal or terminal emulation program as follows:

❑ Emulation mode: VT100

❑ Baud rate: 9600

❑ Data bits: 8

❑ Parity: None

❑ Stop bits: 1

❑ Flow control: None

❑ Key mode: Terminal keys

RS232

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 235 236

Pas de commentaire

Allied-telesis AT-S41 Manuel d'utilisateur Page 28