Allied-telesis AT-S41 Manuel d'utilisateur télécharger pdf (Page 189)

AT-S41 User’s Guide

189

2. To create a port trunk, do the following:

a. Check the ports that will make up the port trunk. A port trunk can

contain up to four ports. All of the ports in a port trunk must be in

the same trunk group.

b. Select Enable from the pull-down menu to the right of the trunk

group that contains the port trunk members.

c. Click the Apply button to the right of the port trunk group you

enabled.

The new port trunk is immediately activated on the switch.You

can now connect the data cables to the ports of the trunk on the

switch.

3. To delete a port trunk do the following:

a. Deselect all port members of the trunk you want to delete.

b. Select Disable from the pull-down menu to the right of the trunk

group that contained the port trunk members.

c. Click the Apply button to the right of the port trunk group you

disabled.

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 235 236

Pas de commentaire

Allied-telesis AT-S41 Manuel d'utilisateur Page 189