Allied-telesis AT-S24 Manuel d'utilisateur télécharger pdf (Page 47)

AT-S24 Version 2.01 User’s Guide

The Port Parameters for the Spanning Tree Protocol window shown in

Figure 12 is displayed. The window lists the ports on the switch and

the current STP parameter settings for the ports.

Figure 12 Port Parameters for the Spanning Tree Protocol

3. To enable or disable STP for all the ports on the switch, select either

Enable Spanning Tree for all Ports or Disable Spanning Tree for all Ports

at the bottom of the window.

If you enable STP on the ports, the Omega interface sets each port to

the default values of 128 for the port priority and 10 for the port cost

for 100 Mbps ports and 100 for 10 Mbps ports.

4. To enable or disable STP for a particular port or to adjust the STP

parameters for a port, select the port from the window.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 163 164

Pas de commentaire

Allied-telesis AT-S24 Manuel d'utilisateur Page 47