Allied-telesis AT-GS950/48 Manuel d'utilisateur télécharger pdf (Page 39)

AT-GS950/48 Gigabit Ethernet WebSmart Switch Installation Guide

Installing the Switch in a Rack

To install the AT-GS950/48 Gigabit Ethernet Smart switch in a rack,

perform the following procedure:

Note

The rack mount screws are not provided.

1. If attached, remove the rubber feet using a flat-head screwdriver as

shown in Figure 1.

1. Removing Feet from Switch

2. Install a bracket on one side of the switch using a Phillips screwdriver

and four of the rack-mount screws included with the switch, as shown

in Figure 9

Caution

The brackets provided must be used to securely mount the switch

on the rack.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Pas de commentaire

Allied-telesis AT-GS950/48 Manuel d'utilisateur Page 39