Allied-telesis AT-GS950/48 Manuel d'utilisateur télécharger pdf (Page 36)

Chapter 2: Installation

Installing the Switch on a Wall

The AT-GS950/48 Gigabit Ethernet Smart switch can be mounted

vertically on a wall using the two mounting brackets, screws, and anchors

provided in the accessory kit.

Note

The plastic anchors used for wall mounting the switch are intended

for installation in walls made of sheetrock or concrete materials.

To wall-mount the switch, perform the following procedure:

1. Place the unit on a level, secure surface.

2. Attach a mounting bracket to one side of the switch using four Phillips

head screws that come with the switch, as shown in Figure 6.

Figure 6. Attaching Brackets for Wall Mounting

3. Install the second mounting bracket on the other side of the switch

using the four remaining Phillips head screws.

1763

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Pas de commentaire

Allied-telesis AT-GS950/48 Manuel d'utilisateur Page 36