Allied-telesis AT-2911 Series Adapters Manuel d'utilisateur télécharger pdf (Page 66)

Chapter 3: Modifying Advanced Properties

Receive Buffers

The Receive Buffers property specifies the number of receive buffers

allocated for the adapter. Increasing this value may enhance performance

in receiving traffic, but consumes more system memory.

To change the Receive Buffers value, do the following:

1. Access the Advanced Properties.

See “Accessing Advanced Properties” on page 43.

2. Select Receive Buffers in the Property box.

The Receive Buffers page is displayed as shown in Figure 31.

Figure 31. Receive Buffers Page

3. Select one of the following options:

 Default— Specifies the default number of receive buffers allocated

to the adapter. This is the default setting.

 Maximum— Specifies the maximum number of receive buffers

allocated to the adapter.

 Minimum— Specifies the minimum number of receive buffers

allocated to the adapter.

4. Click OK.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 119 120

Pas de commentaire

Allied-telesis AT-2911 Series Adapters Manuel d'utilisateur Page 66