Allied-telesis AT-2711 Series Manuel d'utilisateur télécharger pdf (Page 4)

AT-2711 Series Fast Ethernet Network Adapters Linux Configurations

PN 613-001871 Rev A 4 Allied Telesis, Inc.

Note

Replace "eth

" with the name of the Ethernet interface that you obtained

in step 2 and

xx:xx:xx:xx:xx:xx

with the hardware address of your

adapter. "eth

" appears twice in the file.

5. Save the ifcfg-eth

file.

6. Repeat step 3 to 5 for all of the Ethernet interfaces of AT-2711 series adapters

on your system.

7. Reboot your Linux system.

8. Verify that your AT-2711 series adapter is running 100 Mbps in the full-duplex

mode by entering the following command:

ethtool eth

The command output should display:

Advertised Auto-Negotiation is No

Speed is 100

Duplex mode is Full

9. Repeat step 8 for all of the Ethernet interfaces of AT-2711 series adapters on

your system.

1 2 3 4

Pas de commentaire

Allied-telesis AT-2711 Series Manuel d'utilisateur Page 4