Allied-telesis AT-S25 Manuel d'utilisateur télécharger pdf (Page 72)

Section II: Local and Telnet Mangement

Configuring Limited Security Level

Perform the following procedure if you intend to activate the Limited

security level on the stack. This procedure explains how to set the

maximum number of MAC addresses the port groups can learn. (The

default is 100.) You must set these values before you activate Limited

security level. If you want to set the stack to the Automatic, Secured, or

Lock All Ports security level, skip this procedure and go to Activating a

Port Security Level on page 75.

Note

This procedure can only be performed from a local management

session. You cannot perform it from a Telnet management session.

1. From the Main Menu, type 1 to select Ports Menu.

2. From the Ports Menu, type 5 to select Port Security.

The Port Security menu in Figure 24 is displayed.

Figure 22 Port Security Menu

3. From the Port Security menu, type 2 to select Port Security Limited-

Mode menu.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 275 276

Pas de commentaire

Allied-telesis AT-S25 Manuel d'utilisateur Page 72