Allied-telesis AT-S25 Manuel d'utilisateur télécharger pdf (Page 43)

AT-S25 Management Software User’s Guide

The basic switch parameters can be found in the Administration Menu,

as shown in Figure 10.

Figure 10 Administration Menu

Table 1 lists the basic switch parameters used in the Administration

Menu.

Table 1 Basic Switch Parameters

PARAMETER DESCRIPTION

1 - IP Address

This parameter specifies the IP address of the stack.

You must specify an IP address if you intend to

remotely manage the stack using a Telnet utility, an

SNMP management program, or a Web browser.

2 - Subnet Mask

This parameter specifies the subnet mask. You must

specify a subnet mask if you assigned an IP address to

the stack.

3 - Default

Gateway

This parameter specifies the default router’s IP address.

This address is required if you intend to remotely

manage the stack from a management station that is

separated from the stack by a router.

4 - System Name

This parameter specifies a name for the stack (for

example, Sales).

The value range is 1 to 39 alphanumeric characters.

This parameter is optional.

NOTE: Assigning names to the different stacks in your

network can make it easier for you to identify them.

This can help you avoid performing a configuration

procedure on the wrong stack.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 275 276

Pas de commentaire

Allied-telesis AT-S25 Manuel d'utilisateur Page 43