Allied-telesis AT-MCM02 Manuel d'utilisateur télécharger pdf (Page 17)

AT-MCM02 Management Module Installation Guide

Management LEDs

Table 1 lists the LEDs located in the Management section on the front panel of

the media converter.

Table 1 Management LEDs

Note

For information on the other LEDs on the media converter, refer to the

media converter’s installation guide.

LED Status Definition

LNK ON A link has been established between the management

module and the hub, switch, or management station to

which it is connected.

OFF No link has been established.

REC ON The module is receiving data.

Ready ON The management module has been installed and configured.

Flashing The management module has been installed but has not

been configured.

OFF Either the management module has not been installed or it

has been installed incorrectly.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

Pas de commentaire

Allied-telesis AT-MCM02 Manuel d'utilisateur Page 17