Allied-telesis AT-MCM02 Manuel d'utilisateur télécharger pdf (Page 11)

Chapter 1

Overview

The AT-MCM02 is an optional management module for the AT-MCF06,

AT-MCF12, AT-MCF106, and AT-MCF112 Series Multichannel Media

Converters. When installed, the AT-MCM02 module allows you to monitor the

operating status of the media converter from a management station on your

network using either the Telnet application protocol or an SNMP

management program. The module also allows you to monitor a media

converter by directly connecting a terminal or PC to a management port on

the media converter. The AT-MCM02 module allows you to do the following:

❑ Check the link status of the fiber optic and twisted pair ports on the

media converter.

❑ Override the Link Test switch on the media converter and either start

or stop a link test.

❑ Reset the media converter channels.

❑ Download a new version of the media converter’s operating software.

Note

For instructions on how to install the media converter, refer to the

installation guide provided with the media converter.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Pas de commentaire

Allied-telesis AT-MCM02 Manuel d'utilisateur Page 11