Allied-telesis AT-DC2552XS Manuel d'utilisateur télécharger pdf (Page 63)

Stack Installation Guide for AT-2552XS L2 Data Center Switch

Figure 33. Removing QSFP+ Dust Cover

7. Insert the fiber optic cable to the port on the transceiver, as shown in

Figure 34, until it clicks in place.

Figure 34. Attaching a Fiber Optic Cable to an QSFP+ Transceiver

8. Repeat this procedure if you have other QSFP+ transceivers to install.

Installing a

QSFP+ MTHTP

Cable

Perform the following procedure to install a QSFP+ MTHTP cable:

1. Remove the QSFP+ MTHTP cable from its shipping container and

store the packaging material in a safe location.

2. Remove the dust cover from the chassis QSFP+ slot. See Figure 35

on page 64.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 83 84

Pas de commentaire

Allied-telesis AT-DC2552XS Manuel d'utilisateur Page 63