Allied-telesis AT-2716POE Manuel d'utilisateur télécharger pdf (Page 25)

AT-2716POE Fast Ethernet Fiber & PoE Adapter Installation and User’s Guide

7. Depending upon model order connect an appropriate unused power

connector from the system power supply harness to the AT-2716POE

SATA or IDE power connector receptacle as shown in Figure 7.

Figure 7. Installing System PS SATA Harness connector to AT-

2716POE

8. Replace the system’s cover and secure it with the screws removed in

Step 2.

9. Disconnect any personal antistatic devices.

10. Power the system on.

Note

Once the system returns to proper operation, the adapter

hardware is fully installed, but is not fully functional until the AT-

2716POE driver software (Chapters 3 and 4) and AT-2716POE

AT-Mux Configuration software (Chapter 5) is installed.

Next, connect the network cables. See “Connecting the Network Cables”

on page 26.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 90 91

Pas de commentaire

Allied-telesis AT-2716POE Manuel d'utilisateur Page 25