Allied-telesis AR700 Series Manuel d'utilisateur Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 53
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
Features in 275-05 9
Version 275-05
C613-10473-00 REV D
CR00011510
IPsec 3 The maximum SPI value has been increased in the commands:
create ipsec saspecification=spec-id inspi=spi
outspi=spi [other parameters]
set ipsec saspecification=spec-id inspi=spi outspi=spi
[other parameters]
The spi is now an integer in the range 256 to 4294967295.
YYY- - - ----
CR00011774
Switch 3 The dot1qTpFdbPort MIB entry displays the ports on which the switch has
learned MAC addresses. Previously, the switch started the list of ports at port 0
instead of port 1.
This issue has been resolved.
---
- - - -YY-
CR00012014
Switch 3 Setting a port’s speed to a fixed speed (such as 100mfull) should also disable
automdi on the port. Previously, if the switch set the port speed to a fixed speed
during start-up before the switch had fully initialised, auto MDI was not disabled.
This issue has been resolved.
---- - - -YY-
CR00012175
OSPF 3 In a segmented NBMA network, in which more than one designated router was
elected for the network, sometimes the router or switch did not add the routes
to the extra designated routers. Note that a segmented network like this only
occurs as the result of an incorrect configuration.
This issue has been resolved. The router or switch correctly determines routes in
such a network.
YYY
- - - -YY-
CR00012283
Switch 3 Previously, it was not possible to create two protocol-based VLANs on the same
ports if they had the same protocol but a different Ethernet encapsulation.
This issue has been resolved, so you can now create such VLANs.
---
- - - -YY-
CR Module Level Description
AR400
AR7x5
AR750S
Rapier i
AT-8800
AT-8600
AT-8700XL
AT-8948
AT-9900
AT-9800
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 52 53

Commentaires sur ces manuels

Pas de commentaire