Allied-telesis AR700 Series Manuel d'utilisateur Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 53
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
Features in 275-04 16
Version 275-05
C613-10473-00 REV D
CR00011387 PPP 2
Using an online limit for a PPP interface over PPPoE over a VLAN caused the router
or switch to reboot when the online limit was reached.
This issue has been resolved.
YYYYY - - YYY
CR00011396 PIM on IPv6 2
When a user specified a static RP candidate and saved the configuration with the
create config command, the resulting configuration file did not include the RP
candidate. Therefore, rebooting the router or switch deleted the static RP
candidate entry.
This issue has been resolved.
YYYYY - - YYY
CR00011454 TCP 2
When the router or switch had an idle timer configured for incoming Telnet
sessions, and the associated lower-layer interface went down before the Telnet
session’s idle timer expired, the Telnet session’s TCP entry would never time out.
This issue has been resolved. The Telnet idle timer expires and TCP entries are
removed, even if the interface has gone down.
YYYYYY - YYY
CR00011473 ISAKMP 2
Configuring an ISAKMP policy with a 24-character name sometimes caused the
router or switch to reboot. Also, it was possible to enter over-length names into
the isakmppolicy parameter of the command set ipsec policy.
Both issues have been resolved.
YYYYY - ----
CR00011519 Switch 2
Layer 2 switch traffic throughput on AT-9924T/4SP switches has been improved.
-------
-
Y-
CR00011585 OSPF 2
Adding the same OSPF stub or host twice caused OSPF to suspend its operation,
causing neighbour relationships to eventually fail.
This issue has been resolved.
YYYYYY - YYY
CR00011586 Switch 2
When a port is no longer a member of any VLAN as an untagged port, it would
discard received untagged BPDU packets.
Note that this issue only occurred on AT-8900 and AT-9900 switches; other
switches already correctly handled untagged frames on tagged ports when
required.
This issue has been resolved.
-------YY-
CR Module Level Description
AR400
AR7x5
AR750S
Rapier i
AT- 8 8 0 0
AT- 8 6 0 0
AT-8700XL
AT- 8 9 4 8
AT- 9 9 0 0
AT- 9 8 0 0
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 52 53

Commentaires sur ces manuels

Pas de commentaire