Allied Telesis AT-S82 Guide d'installation télécharger pdf (Page 42)

Chapter 2: Installation

2. Plug the other end of the power cord into a wall outlet.

3. Verify that the POWER LED is green.

If the LED is OFF, refer to “Checking the POWER LED” on page 48.

The switch is now powered on and ready for network operations. To

start a remote management session on the switch, refer to “Starting a

Remote Management Session” on page 43.

Warning: Power cord is used as a disconnection device. To de-

energize equipment, disconnect the power cord.  E3

Pluggable Equipment. The socket outlet shall be installed near

the equipment and shall be easily accessible.  E5

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 51 52

Pas de commentaire

Allied Telesis AT-S82 Guide d'installation Page 42