Allied Telesis AT-S80 Guide de l'utilisateur télécharger pdf (Page 17)

AT-S80 Management Software User’s Guide

Local Management Connection

To establish a local management connection with an AT-FS750/16 or

AT-FS750/24 Fast Ethernet Switch, you must connect a terminal or a PC

with a terminal emulator program to the Console port on the front of the

switch using the management cable included with the unit. This type of

connection is referred to as “local” because you must be physically close

to the switch, such as in the wiring closet where the device is located.

Note

For instructions on how to start a local management session, refer to

“Starting a Local Management Session” on page 24.

A switch does not need an Internet Protocol (IP) address for local

management. You can start a local management session on a switch at

any time. It does not interfere with the forwarding of network packets by

the device.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 241 242

Pas de commentaire

Allied Telesis AT-S80 Guide de l'utilisateur Page 17