Allied Telesis AT-2450 Series Guide d'installation télécharger pdf (Page 115)

Network Adapter Card Installation Guide

115

Configuration - Specifies connection options, for example, speed

and duplex mode of the card or to enable or disable Boot ROM.

Diagnostics - The Card Test verifies that your computer and the

adapter card can communicate. To run a Card Test, refer to Card Test

Diagnostics on page 115.

View Information File - Refers you to the documentation on the

CardAssistant CD.

Card Test

Diagnostics

To run a card test diagnostics, perform the following procedure:

1. From the Main Menu, select Diagnostics.

The screen shown in Figure 97 is displayed.

Figure 97 Diagnostics Menu

2. Select Card test.

3. Press <Enter>.

4. A screen is displayed, showing the Card Tests results for the

following:

EEPROM - checks that the EEPROM was read and certain values are

valid.

Loopback - checks whether a packet can be sent from memory to

the adapter card and back to memory successfully.

Line - checks for a valid connection between the adapter card and

the remote Ethernet hub or switch.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 121 122

Pas de commentaire

Allied Telesis AT-2450 Series Guide d'installation Page 115