Allied Telesis AT-2450 Series Guide d'installation télécharger pdf (Page 102)

VLAN

102

It may take Windows a few moments to renumber the adapter.

When this has been completed, the window shown in Figure 86 is

displayed.

Figure 86 Set VLAN ID Window

6. Select or enter the correct VLAN ID. This VLAN ID is determined by

the system administrator; please contact the administrator for the

correct VLAN information. For this example, we will se the VLAN ID

to 2 then select OK.

The window shown in Figure 87 is displayed.

Figure 87 VLAN Setup Window

A new Local Area Connection appears under Current VLANs. The

connection number may vary depending on your system.

7. Select OK.

8. From the Local Area Connection Properties window, select OK.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 121 122

Pas de commentaire

Allied Telesis AT-2450 Series Guide d'installation Page 102