Allied Telesis AT-2973T Guide d'installation télécharger pdf (Page 46)

Chapter 3: Installing Broadcom Boot Agent Driver Software

Note

The message prompting you to press CTRL+S is displayed once for

each Broadcom NetXtreme II adapter you have in your system that

has MBA enabled. The messages are displayed in the same order

as the assigned adapter device number.

3. Use the UP ARROW and DOWN ARROW keys to move to the Boot

Protocol menu item.

Note

If you have multiple adapters in your system and you are unsure

which adapter you are configuring, press CTRL+F6, which causes

the port LEDs on the adapter to start blinking.

4. Use the UP ARROW, DOWN ARROW, LEFT ARROW, and RIGHT

ARROW keys to move to and change the values for other menu items,

as desired.

5. Press F4 to save your settings.

6. Press ESC when you are finished.

Setting Up the

BIOS

To boot from the network with the MBA, make the MBA enabled adapter

the first bootable device under the BIOS. This procedure depends on the

system BIOS implementation. Refer to the user manual for the system

BIOS implementation for instructions.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 177 178

Pas de commentaire

Allied Telesis AT-2973T Guide d'installation Page 46