Allied Telesis AT-A17 Guide d'installation télécharger pdf (Page 21)

Chapter 2

Installation

The following sections explain how to install the unit onto your network. The

unit can be installed as a standalone system (such as on a desk) or in a

standard 19-inch rack.

Selecting a Site for the Media Converter

Be sure to observe the following requirements when choosing a site for your

media converter:

❑ Select a site that is dust-free and moisture-free.

❑ Do not block the ventilation openings on the unit. The site should

allow for proper heat dissipation from and adequate ventilation

around the media converter.

❑ Be sure that the site will allow you to easily access the twisted pair

cables, fiber cables, and power cord.

❑ Use dedicated power circuits or power conditioners to supply reliable

power to the unit.

❑ Keep the media converter and twisted pair cabling away from sources

of electrical noise, such as radios, electric motors, transmitters,

broadband amplifiers, power lines, and fluorescent fixtures.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 49 50

Pas de commentaire

Allied Telesis AT-A17 Guide d'installation Page 21