Allied-telesis x510 Series Manuel d'utilisateur télécharger pdf (Page 75)

x510 Series Installation Guide for Stand-alone Switches

Figure 33. Connecting the Management Cable to the Console Port

2. Connect the other end of the cable to an RS-232 port on a terminal or

PC with a terminal emulator program.

3. Configure the terminal or terminal emulator program as follows:

 Baud rate: 9600 bps (The baud rate of the Console Port is

adjustable from 1200 to 115200 bps. The default is 9600 bps.)

 Data bits: 8

 Parity: None

 Stop bits: 1

 Flow control: None

Note

The port settings are for a DEC VT100 or ANSI terminal, or an

equivalent terminal emulator program.

4. Press Enter.

You are prompted for a user name and password.

5. When prompted for a user name, go to “Disabling VCStack” on

page 76.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 89 90

Pas de commentaire

Allied-telesis x510 Series Manuel d'utilisateur Page 75