Allied-telesis LanEdge Print Server Manuel d'utilisateur télécharger pdf (Page 13)

Page 11

NetWare 3.x, 4.x Print Server Mode

For Remote Printer mode, please refer to the full user manual

on the CD-ROM.

1. Copy the file QUICKSET.EXE from the

\Utility\Dos directory on the CD-ROM to your

workstation’s hard disk.

2. Log in to the NetWare server as ADMIN.

3. Run Quickset with the following syntax, to configure both

the Print Server and the NetWare server.

Quickset Name /FS=F

Where Name is the Default Server Name shown on a

sticker on the base of the Print Server, and F is the master

file server. (The /FS=F parameter is not required for NDS

mode.)

4. Use the CAPTURE command to redirect print jobs to the

queues created by QUICKSET.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Allied-telesis LanEdge Print Server Manuel d'utilisateur Page 13