Allied-telesis LanEdge Print Server Manuel d'utilisateur télécharger pdf (Page 10)

Page 8

3. On the Details tab (Windows 95/98) or Ports tab

(Windows NT 4.0), click the Capture Printer Port button.

4. In the Path field of the Capture Printer Port dialog, shown

above, enter:

\\Server_name\Port

Server_name is the name of the Print Server. If you

have not changed the name, use the Default Server Name

as shown on the base of the device.

Port is the port on the Print Server to which the printer is

attached. Use P1, P2, or P3 for parallel port 1, 2, 3

respectively.

5. Check the Reconnect at Logon checkbox if desired. Then

click OK.

6. Configure your MS-DOS program to use this printer type

on LPT1 (your PC's parallel port 1). When you print, the

data will be re-directed to the Print Server's printer.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Pas de commentaire

Allied-telesis LanEdge Print Server Manuel d'utilisateur Page 10