Allied-telesis FastPrint Server Manuel d'utilisateur télécharger pdf (Page 59)

Chapter 7. Windows Peer-to-Peer

Software configuration

FastPrint Server User’s Guide 49

Figure 7 Printer Details (Win95 PtP)

3. Select Add Port and the following Add Port screen will appear:

Figure 8 Add Port (Win95 PtP)

4. Select Other as the type of port you want to add and select PrintServer from the port

list, as shown above.

5. Then click OK and the Configure PrintServer window will appear.

6. Enter the configuration information as described in Software configuration on page

47. Ensure that you select a different FastPrint port each time, and assign a unique

name to that port (e.g. pserv_2 for parallel port 2).

7. Repeat steps 3, 4, and 5 until all FastPrint ports have been added.

8. Install the correct printer for each port. When prompted with the following screen, be

sure that you select the port to which the printer is connected.

Figure 9 Select Port (Win95 PtP)

Configuration is now complete. You can now print using the printers attached to the

FastPrint Server.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 99 100

Pas de commentaire

Allied-telesis FastPrint Server Manuel d'utilisateur Page 59