Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Manuel d'utilisateur Page 243
- Page / 257
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Allied Telesyn AT-VIEW PLUS
DEVICE MANAGEMENT
Note - AT-RG634A: Valid MIB Set values for the Aging Time Value parameter are in the
range [0-2147483647] inclusive. Attempting to set this parameter to any value will not result
in an error, but the new value will not be applied.
Note - AT-RG656BD: The current firmware version does not allow the Learning Status
parameter to be set to 'disable'. Attempting to do so will result in the error message: "The
error occurred with 'Set' operation. Error: time out occurred."
Note - AT-RG656BD : Changing the value of the Aging Time Mode parameter causes the
Aging Time Value parameter to be set to 0.
Note - AT-RG656BD : Valid MIB Set values for the Aging Time Value parameter are in the
range [0-2147483647] inclusive. However, the current firmware version truncates entered
values to 7 digits.
Traffic Priority
Displays the system base priority.
Routing Limit
Displays the routing limit.
Note - Setting the Routing Limit parameter to a value other than 'none' will cause the Base
Priority parameter under Bridge -> Traffic Priority to be set to 0.
Note - When setting the Routing Limit parameter to a value other than 'none', the current
firmware is able to set the parameter successfully for the CLI but not for SNMP. As a result,
AT-View Plus Device Manager will continue to display the value 'none'.
Note - When the Routing Limit parameter is set to a value other than 'none', the value
'???(0)(???(0))' may sometimes be displayed for this parameter.
QoS Info
Displays Differentiated Service Code Point (DSCP) entries and its QoS priority level.
IGMP Menu
From the IGMP menu, you can view and edit information related to Internet Group Management
Protocol (IGMP).
Leave Time
Displays RTC status information including current time, offset, last update, and last delta.
e parameter are in the range [0-25] inclusive.
Attempting to set this parameter to a value outside the valid range will not result in an error
but the new value will not be applied.
Note - Valid MIB Set values for the Leave Tim
PN 613-50665 Rev A Page 243 of 257
- IEW PLUS 3.0 1
- EVICE MANAGEMENT GUIDE 1
- TABLE OF CONTENTS 3
- DEVICE MANAGEMENT 10
- Basic Operations 11
- Menu for stacked devices 13
- Port selection dialog box 14
- Port status colors 14
- LED status 15
- Utilization 15
- Device-Specific Menu Items 15
- AT-8000 Series 16
- RMON Menu 24
- Stacking Menu 27
- Expansion Module Notes 27
- AT-8124 29
- AT-8124XL (V2) 33
- AT-8200XL Series 38
- • Port MDI Configuration 43
- • Port VDSL Link Mode 43
- AT-8324 45
- AT-8324SX 51
- AT-8300GB Series 57
- AT-8400 65
- • Utilization 70
- • Spanning Tree Info 70
- AT-8400 Line Cards 72
- AT-8412 73
- AT-8413 73
- AT-8414 74
- AT-9006 Family 76
- VLAN Menu 79
- AT-9410GB 81
- AT-FH800u 86
- Hub Menu 88
- Module Menu 88
- AT-AR200E 90
- ADSL Menu 94
- ATM Menu 96
- PPP Menu 98
- Receive ACC Map 99
- Transmit ACC Map 99
- Magic Number 99
- FCS Size 99
- Tinygram 100
- Ring ID 100
- Line ID 100
- LAN ID 100
- Port Menu 101
- AT-AR300 and AT-AR300L 103
- Agent Menu 104
- Routing Menu 105
- Bridge Menu 105
- Frame Relay Menu 105
- Call List Menu 106
- AT-AR320 107
- AT-AR350 110
- AT-AR370 113
- AT-AR410 117
- AT-AR450S 121
- AT-AR720 124
- AT-AR725 128
- AT-AR740 133
- AT-AR745 138
- AT-8724XL 143
- AT-8748XL 147
- AT-8824 151
- AT-8848 155
- Rapier 16F/MT and 16F/SC 159
- Rapier 24 and 24i 164
- Rapier 48 and 48i 169
- Rapier G6 173
- Main Window 177
- AT-8948 182
- SwitchBlade 4004 186
- SwitchBlade 4008 191
- SwitchBlade Line Cards 196
- AT-9812T 199
- AT-9816GB 203
- AT-MCF06 Family 207
- Status Menu 209
- AT-MCF12 Family 210
- AT-MCF106 Family 213
- AT-MCF112 Family 216
- AT-MPB3000 219
- AT-MPB3000 Modules 222
- AT-MCM110 Modules 223
- AT-MCM1000S Modules 224
- AT-MCM1000T Modules 225
- PowerBlade 226
- PowerBlade Modules 229
- AT-RG213 Family 234
- RTC Menu 235
- AT-RG600 Series 238
- IGMP Menu 243
- VoIP Menu 244
- Port Interface Cards 248
- AT-AR022 249
- AT-AR023 249
- AT-AR024 249
- AT-AR026 249
- AT-AR027 250
- Network Service Modules 251
- Uplink Modules 253
- Modules 256
Produits connexes et manuels pour Matériel informatique Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT
(26 pages)
(46 pages)
(50 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.051 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels