Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 230)

Allied Telesyn AT-VIEW PLUS

DEVICE MANAGEMENT

AT-PB100 Series Media Converter Modules

PB101 PB102 PB103/1 PB103/2

LED State Description

DUP

Green

Gray

The media converter is operating in full-duplex mode.

The media converter is operating in half-duplex mode.

ML Green The Missing Link feature is enabled.

Note - The Port A Mode parameter for these modules has a fixed value of 'full' and cannot be

modified.

Note - The current firmware version does not allow the Port B Mode parameter to be set to 'full'

from the default value of 'half'. Likewise, it cannot be set to 'half' if it was set to 'full' using the

Omega interface.

Note - Expect the DUP LED to be green when it should be gray and vice-versa when the Port B

Mode parameter is set to 'auto'. This is because the current firmware version is unable to provide

information on the negotiated mode for Port B.

PN 613-50665 Rev A Page 230 of 257

1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 256 257

Pas de commentaire

Allied-telesis AT-VIEW PLUS 3.0 DEVICE MANAGEMENT Manuel d'utilisateur Page 230