Allied-telesis AT-TQ Series Manuel d'utilisateur télécharger pdf (Page 46)

Chapter 3: Manage Menu

Configuring the Radio Settings

To configure the parameter settings of the 2.4 and 5 GHz radios, perform

the following procedure:

1. From the Manage menu, select Radio.

The management software displays the “Modify radio settings

window,” shown in Figure 9 on page 47.

2. From the Radio pull-down menu, select a radio. Options 1 and 2 are

the 2.4 and 5 GHz radios, respectively. The default is radio 1. You can

configure only one radio at a time.

3. To activate a radio, click the On dialog circle for the Status option. You

cannot configure a radio when its status is off. To deactivate a radio,

click the Off dialog circle.

4. Configure the radio parameters, which are defined in Table 3 on

page 48.

5. When you are finished configuring the parameters, click the Update

button to activate and save your changes on the access point.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 171 172

Pas de commentaire

Allied-telesis AT-TQ Series Manuel d'utilisateur Page 46