Allied-telesis AT-TQ Series Manuel d'utilisateur télécharger pdf (Page 31)

AT-TQ Wireless Access Point Series User’s Guide

Table 1. Review Description of this Access Point

Field Description

IP Address Displays the IP address of the access

point. For instructions on how to set the IP

address, refer to “Assigning a Static IP

Address to the Access Point” on page 36

or “Assigning a Dynamic IP Address from

a DHCP Server to the Access Point” on

page 38.

MAC Address Displays is the MAC address of the device

and radio 1. Radio 2 has a different MAC

address. You may not change the MAC

addresses of the device or radios.

Firmware Version Displays is the version number of the

management software on the access

point.

Build Number Displays the build number. This number

and the firmware version number identify

the management software.

Time since system-up Displays the amount of time since the unit

was reset or powered on.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 171 172

Pas de commentaire

Allied-telesis AT-TQ Series Manuel d'utilisateur Page 31