Allied-telesis AT-S97 Manuel d'utilisateur Page 80
- Page / 218
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Chapter 5: Port and Module Commands
80
SYSTEM SET PORT
Syntax
system set port id=
chassis
/
slot
/[
channel
/]
port
port-state=disable|enable auto-neg=disable|enable
speed=10|100|1000 duplex=half|full
crossover=mdi|mdix
ingress-rate-limit=none|128k|256k|512k|1m|2M|4M|8M
egress-rate-limit=none|128k|256k|512k|1m|2M|4M|8M
Parameters
id Specifies a twisted pair or fiber optic port on a media
converter module. You can configure only one port at a
time or all the ports of the same type (i.e., twisted pair or
fiber optic ports) on a module. The ID consists of the
following parts:
chassis Specifies the ID number of a chassis. In version
1.3.0 the ID number of a chassis is 0 or 31.
slot Specifies the slot number of the media converter
module with the port. Possible values are:
1 or 2 Specifies a slot number of a media
converter slot. In the AT-MCF2000
Chassis, the left slot is 1 and the
right slot is 2.
m Specifies the 10/100/100Base-T port
on the management module.
channel Specifies the number of the channel on the
AT-MCF2012LC and AT-MCF2012LC/1
Modules with the port to be configured. To
configure all the ports of the same type, either
twisted pair or fiber optic ports, omit this
parameter. Possible values are:
1 to 12 Specifies a channel. Channel 1
consists of twisted pair port 1 and
fiber topic port 1, channel 2 of twisted
pair port 2 and fiber topic port 2, and
so on. You can specify only one
channel.
- Command Line Interface 1
- User’s Guide 1
- Contents 3
- Document Conventions 12
- Contacting Allied Telesis 14
- Chapter 1 15
- Management Overview 16
- Chassis ID 18
- Chassis ID 0 19
- (Default) 19
- Chassis ID 31 19
- Chassis ID Jumper 19
- AT-MCF2KFAN 20
- <No System Name> 21
- Quitting a Management Session 24
- Command Formatting 26
- What to Configure First 27
- Assigning an IP 30
- Setting the Date 31
- Enabling the 31
- Telnet or Secure 31
- Shell Server 31
- Saving Your 32
- Basic Commands 33
- Question Mark ‘?’ Key 34
- Parameter 38
- IP Configuration Commands 39
- IP DHCP DISABLE 42
- IP DHCP ENABLE 43
- General System Commands 47
- SYSTEM SET ASYNCHRONOUS 50
- SYSTEM SET CHASSIS 51
- SYSTEM SET CLOCK 52
- SYSTEM SET CONSOLE 53
- SYSTEM SET CONTACT 54
- SYSTEM SET HOSTNAME 55
- SYSTEM SET LOCATION 56
- SYSTEM SHOW ASYNCHRONOUS 57
- SYSTEM SHOW CLOCK 58
- SYSTEM SHOW CONSOLE 59
- SYSTEM SHOW INFO 60
- Port and Module Commands 61
- SYSTEM RESET CHASSIS 64
- SYSTEM RESET CLUSTER 66
- SYSTEM RESET MODULE 68
- SYSTEM SET INTERFACE 71
- Mode Select Button 75
- Operating Mode Guidelines 75
- SYSTEM SET MODULE 77
- SYSTEM SET PORT 80
- SYSTEM SHOW CHASSIS 86
- SYSTEM SHOW CLUSTER 88
- SYSTEM SHOW INTERFACE 90
- SYSTEM SHOW MODULE 97
- Examples 100
- Chapter 6 101
- Overview 102
- NTP client 103
- Command Description 103
- NTP DISABLE 104
- NTP ENABLE 105
- Parameters 106
- Privilege Levels 106
- Description 106
- NTP SHOW 107
- Chapter 7 109
- LOGGING CLEAR EVENTLOG 112
- LOGGING DISABLE EVENTLOG 113
- LOGGING DISABLE SYSLOG 114
- LOGGING ENABLE EVENTLOG 115
- LOGGING ENABLE SYSLOG 116
- LOGGING SET EVENTLOG 117
- LOGGING SET SYSLOG 119
- LOGGING SHOW 120
- LOGGING SHOW EVENTLOG 122
- Configuration File Commands 129
- Creating a New 131
- Configuration 131
- Editing a Master 133
- File Header Lines 134
- System Configuration 134
- IP Configuration 135
- Log Configuration 135
- NTP Configuration 136
- Telnet and SSH Configuration 136
- User Configuration 136
- Blade Configuration 137
- CONFIG RUN 141
- CONFIG SAVE 142
- CONFIG SAVE FILESYSTEM 143
- CONFIG SET 145
- CONFIG SHOW 147
- File System Commands 149
- Guidelines to 151
- Using the TFTP 151
- FILE COPY 153
- FILE DELETE 156
- FILE DOWNLOAD 159
- General Description 161
- Description of Syntax 1 161
- Description of Syntax 2 162
- Description of Syntax 3 163
- Description of Syntax 4 163
- Software 164
- FILE RENAME 166
- FILE SHOW 169
- FILE UPLOAD 172
- Telnet Server Commands 175
- TELNET DISABLE 178
- TELNET ENABLE 179
- TELNET SHOW 180
- Secure Shell Server Commands 181
- SSH DISABLE 184
- SSH ENABLE 185
- SSH SHOW 186
- Manager Account Commands 187
- USER ADD 190
- USER DELETE 191
- USER SET 192
- Adams” account: 193
- USER SHOW 194
- Diagnostics Commands 195
- DIAGNOSTICS SHOW CHASSIS 197
- DIAGNOSTICS SHOW MODULE 199
- AT-S85 and AT-S97 Management 203
- Software Default Settings 203
- Event Log 204
- Manager Account 206
- Master Configuration File 207
- Network Time Protocol Client 208
- RS-232 Terminal Port 209
- Secure Shell Server 210
- Syslog Client 211
- Telnet Server 212
- Numerics 213
Produits connexes et manuels pour Matériel informatique Allied-telesis AT-S97
(84 pages)ABC Office 20612 C Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Aktenvernichter ABC Office 20612 C.
Wir stellen 1 PDF-Handbücher ABC Office 20612 C zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Commentaires sur ces manuels