Allied-telesis AT-S41 Manuel d'utilisateur télécharger pdf (Page 179)

AT-S41 User’s Guide

179

If you select a port, the Configuration of Port page is displayed, as

shown in Figure 69.

Figure 69 Configuration of a Port

This page displays the port’s configuration and operating status.

Set the port parameters as desired and click the Apply button. The

parameters are described below.

Port Type

The port type. Ports 1-48 are 10/100Base-TX and can operate at

10/100 Mbps. Ports 49-50 are 1000Base-TX and can operate at

10/100/1000 Mbps.

Operation Status

The status of the link between the port and the end node

connected to the port. Possible values are:

Up - indicates that a valid link exists between the port and the end

node.

Down - indicates that the port and the end node have not

established a valid link.

Admin. Status

The current operating status of the port.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 232 233

Pas de commentaire

Allied-telesis AT-S41 Manuel d'utilisateur Page 179