Allied-telesis AT-S39 Manuel d'utilisateur télécharger pdf (Page 18)

Section I: Overview

Local Management Session

You establish a local management session with an AT-8024, AT-8024GB,

or ATY-8026FC Fast Ethernet Switch by connecting a terminal or a PC

with a terminal emulator program to the RS232 Terminal port on the

front panel of the switch, using a straight-through RS-232 cable. This

type of management session is referred to as “local” because you must

be physically close to the switch, such as in the wiring closet where the

switch is located.

Once the session is started, you will see a menu from which you can

make selections to configure and monitor the switch. You can configure

all of a switch’s operating parameters from a local management session.

Note

For instructions on starting a local management session, refer to

Starting a Local Management Session on page 25.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 241 242

Pas de commentaire

Allied-telesis AT-S39 Manuel d'utilisateur Page 18