Allied-telesis AT-S39 Manuel d'utilisateur télécharger pdf (Page 242)

AT-S39 User’s Guide

242

Creating or Deleting a Port Trunk

Caution

Do not connect the cables of a port trunk to the ports on the switch

until after you have configured the ports on both the switch and the

end node. Connecting the cables prior to configuring the ports can

create loops in your network topology. Loops can result in

broadcast storms, which can adversely effect the operations of your

network.

If you are deleting a port trunk, disconnect the cables from the ports

before you delete the trunk. Deleting the trunk without first

disconnecting the data cables can create a loop in your network

topology, which can result in broadcast storms.

To create or delete a port trunk, perform the following procedure:

1. From the Home page, select Configuration.

2. From the Configuration page, select Layer 1.

3. Select the Port Trunking tab.

The management software displays the Port Trunking window in

Figure 79.

Figure 79 Port Trunking Window

If the switch does not contain a port trunk, all ports in the switch

image will be black. If there is a port trunk, the ports of the trunk

will be white.

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 298 299

Pas de commentaire

Allied-telesis AT-S39 Manuel d'utilisateur Page 242