Allied-telesis AT-MCF2000 Manuel d'utilisateur télécharger pdf (Page 37)

AT-MCF2000 Multi-channel Media Converter Chassis Installation Guide

3. Align the edge of the module with the guides in the slot

and carefully slide the module into the chassis until it is

flush with the front of the chassis. Refer to Figure 16.

Light pressure may be necessary to seat the module

on the connector on the back panel of the chassis.

Caution

Do not force the module into place. Doing so may

damage the connector pins on the backplane inside

the chassis. If there is resistance, remove the module

and reinsert it after verifying that the edges of the card

are properly aligned with the guides in the chassis’

module slot.

Figure 16. Installing a Media Converter Module

1121-a

AT-MCF2012LC

AT-M

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Pas de commentaire

Allied-telesis AT-MCF2000 Manuel d'utilisateur Page 37