Allied-telesis AT-iMG6x6MOD Electronics Unit Manuel d'utilisateur télécharger pdf (Page 24)

AT-iMG646MOD Installation Guide

24 Chapter 4: Installing the Gateway Indoors

Connecting the Ground Wire

To connect the ground wire, perform the following procedure:

1. Prepare an adequate length of 14AWG stranded grounding wire for the ground connection.

2. Strip 0.25 in.(0.7 cm) of insulation from the ground wire and crimp it into the ground wire ring lug.

3. Secure the ring lug on the stud with a washer and #8-32 Kepnut, as shown in Figure 17.

Figure 17. Securing the Ground Wire Lug

4. Trim and connect the other end of the ground wire to any ground point according to National Electrical

Codes.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Pas de commentaire

Allied-telesis AT-iMG6x6MOD Electronics Unit Manuel d'utilisateur Page 24