Allied-telesis AT-GS2002/SP Manuel d'utilisateur télécharger pdf (Page 37)

AT-GS2002/SP Gigabit Ethernet to Fiber SFP Media Converter Installation Guide

Desktop Installation

You may install the AT-GS2002/SP Media Converter on a desktop by

performing the following procedure:

1. Remove all equipment from the package and store the packaging

material in a safe place.

2. Turn the media converter over and place it on a table.

3. Attach the four rubber feet to the bottom of the media converter as

shown in Figure 7.

Figure 7. Attaching the Rubber Feet

4. Turn the media converter over and place it on a flat, secure surface

(such as a desk or table) leaving ample space around the unit for

ventilation.

5. Go to “SFP Transceiver Installation” on page 35 or “Cable Installation”

on page 40.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Pas de commentaire

Allied-telesis AT-GS2002/SP Manuel d'utilisateur Page 37