Allied-telesis AT-FS970M Series Manuel d'utilisateur télécharger pdf (Page 89)

AT-FS970M Switch Command Line User’s Guide

Saving Your Configuration Changes

To permanently save your changes to the parameter settings on the

switch, you must update the active boot configuration file. This is

accomplished with either the WRITE command or the COPY RUNNING-

CONFIG STARTUP-CONFIG command, both of which are found in the

Privileged Exec mode. When you enter either of these commands, the

switch copies its running configuration into the active boot configuration

file for permanent storage.

To update the active configuration file, enter:

awplus# write

awplus# copy running-config startup-config

Note

Parameter changes that are not saved in the active boot

configuration file are discarded when the switch is powered off or

reset.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 192 193

Pas de commentaire

Allied-telesis AT-FS970M Series Manuel d'utilisateur Page 89