Allied-telesis AlliedWare Plus Operating System Version 5.4.4C (x Manuel d'utilisateur télécharger pdf (Page 222)

System Configuration and Monitoring Commands

Software Reference for x310 Series Switches

8.22 AlliedWare Plus

Operating System - Version 5.4.4C C613-50046-01 REV A

no debug all

This command disables the debugging facility for all features on your device. This stops

the device from generating any diagnostic debugging messages.

The debugging facility is disabled by default.

Syntax no debug all [dot1x|ipv6|nsm]

Mode

Global Configuration and Privileged Exec

Example To disable debugging for all features, use the command:

To disable all 802.1X debugging, use the command:

To disable all IPv6 debugging, use the command:

To disable all NSM debugging, use the command:

Related Commands undebug all

Parameter Description

dot1x

Turns off all debugging for IEEE 802.1X port-based network access-

control.

ipv6

Turns off all debugging for IPv6 (Internet Protocol version 6).

nsm

Turns off all debugging for the NSM (Network Services Module).

awplus#

no debug all

awplus#

no debug all

awplus#

no debug all

awplus#

no debug all

1 2 ... 217 218 219 220 221 222

Pas de commentaire

Allied-telesis AlliedWare Plus Operating System Version 5.4.4C (x Manuel d'utilisateur Page 222