Allied-telesis AlliedView-EMS 3.10 QoS MANAGER Manuel d'utilisateur Page 72

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 128
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 71
6.6.2.2 Add/Modify Flow Group
Property
Name
Description Valid Values
Flow
Group ID
(cannot be
modified)
Specifies the unique
identifier for the Flow
Group.
Range: 0-1023
Description Specifies a brief
description of the Flow
Group.
To set this value, enter an alphanumeric
string from 1-15 characters.
Mark Value This parameter specifies a
replacement value to
write into the DSCP
(TOS) field for all packets.
Range: none, 0-63
Action Specifies the action to be
performed on traffic
belonging to the Flow
Group.
This can be set by selecting any one of
the following values:
FORWARD
FORWARD,SENDMIRROR
DISCARD
SENDMIRROR
SENDMIRROR,SENDVLANPORT
SENDVLANPORT
none
Port Specifies the port where
traffic is sent when
action=sendvlanport. The
port must belong to the
VLAN specified by the
vlan parameter
This can be set by selecting any one of
the following values:
port 1 - n (n = number of ports
available)
none
Premarking Specifies the action to
take on the flow group
before traffic class
bandwidth metering is
applied. Values for
premarking and
markvalue in a Flow
Group override the
setting for the Traffic
Class.
USEMARKVALUE
USEDSCP
none
VLAN Specifies where traffic is
sent when
action=sendvlanport.
Traffic is sent out the port
This can be set by selecting from a list of
available VLANs.
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 72 of 128
Vue de la page 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 127 128

Commentaires sur ces manuels

Pas de commentaire