Allied-telesis AlliedView-EMS 3.10 QoS MANAGER Manuel d'utilisateur Page 67

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 128
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 66
Property Name Description Valid Values
DIAG
NLSP
IPXWAN
any
Destination
IPX Socket
Specifies the destination IPX
socket number of an IPX
packet.
This can be set by entering a 4-
byte hexadecimal value (0000-
FFFF) or by selecting one of the
following:
NCP
SAP
RIP
NNB
DIAG
NLSP
IPXWAN
any
Source TCP
Port
Specifies the TCP source port
of a TCP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Destination
TCP Port
Specifies the TCP destination
port of a TCP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Source UDP
Port
Specifies the UDP source port
of a UDP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Destination
UDP Port
Specifies the UDP destination
port of an UDP/IP packet.
Range: any, 0-65535 or a port
range (n-m).
Source L4
Mask
Specifies the mask or range of
TCP/UDP source ports in the
packet, when you also specify a
single TCP or UDP destination
port number.
This can be set by entering a 4-
byte hex value from 0000-FFFF
Destination L4
Mask
Specifies the mask or range of
TCP/UDP destination ports in
the packet, when you also
specify a single TCP or UDP
destination port number.
This can be set by entering a 4-
byte hex value from 0000-FFFF
L5 Byte Mask
01-16
These parameters each specify
the properties of a single byte
field to match in the Layer 5
part of IP packets, which is the
TCP or UDP payload. For each
byte field you want to match,
specify:
byteoffset, which is a
Each L5 Byte Mask entry can
be set by entering the following
value:
<0-37>, <00-FF>, <00-FF>
(e.g. 3,AA,FF)
AlliedView™-EMS 3.10 QoS Manager User’s Guide Page 67 of 128
Vue de la page 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 127 128

Commentaires sur ces manuels

Pas de commentaire