Allied-telesis AT-S68 Manuel d'utilisateur télécharger pdf (Page 64)

Quality of Service (QoS)

5. Type 3 to select Low Priority Queue Weighting. The following prompt

is displayed:

Enter new value [1 to 15] ->

6. Enter the new value and press <Enter>.

You will be returned to the QoS Menu.

7. Type 4 to set the 802.1p frame TCI Threshold. The TCI Threshold will

determine if a tagged frame is sent to either a high priority queue or

low priority queue.

The following prompt will be displayed:

Enter new value [1 to 8] ->

8. Enter the new value and press <Enter>.

You will be returned to the QoS Menu.

9. Type 5 to select Port Based QoS. The Port Based QoS Menu in Figure

24 is displayed.

Figure 24 Port Based QoS Menu

Port-based QoS will determine if an untagged frame is sent to

either a high priority queue or low priority queue based on the

port-based QoS configuration.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 89 90

Pas de commentaire

Allied-telesis AT-S68 Manuel d'utilisateur Page 64