Allied-telesis AT-S24 Manuel d'utilisateur télécharger pdf (Page 28)

Getting Started

Starting an Omega Session from a Web Browser

This section contains the procedure for starting an Omega session from

a web browser.

Note

You cannot use a web browser to manage a Fast Ethernet switch if

the switch is part of a non-TCP/IP network.

Before you can manage the switch in a TCP/IP environment, it must have

an IP address. In order to configure the IP parameters for the first time,

you must access the Omega program locally using the switch RS232

port; refer to Starting a Local Omega Session Using the RS232 Port on

page 23 for instructions.

To start an Omega session from a web browser, perform the following

procedure:

1. Start your web browser.

Note

If the PC with the web browser is connected directly to the switch or

is on the same side of a firewall as the switch, you must configure

your browser’s network options not to use proxies. Consult your

web browser’s documentation on how to configure the browser not

to use proxies.

2. Enter the IP address of the switch you want to manage in the URL field

of the browser, as shown in Figure 2.

Figure 2 Entering a Switch’s IP Address in the URL Field

Switch’s IP Address

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 163 164

Pas de commentaire

Allied-telesis AT-S24 Manuel d'utilisateur Page 28