Allied-telesis AT-MCR1 Manuel d'utilisateur télécharger pdf (Page 39)

AT-MCR1 Media Converter Chassis Installation Guide

Warning

Do not strip more than the recommended amount of wire.

Stripping more than the recommended amount can create a

safety hazard by leaving exposed wire on the terminal block

after installation.  E10

3. Connect the frame ground wire to the terminal marked with

the ground symbol by inserting the wire into the terminal and

tightening the connection with a flathead screwdriver, as

shown in Figure 20 on page 39.

Warning

When installing this equipment, always ensure that the power

supply ground connection is installed first and disconnected

last.  E11

Figure 20. Inserting Wires into a DC Terminal Block

4. Connect the positive feed wire to the terminal block marked

(+).

40-60VDC

1059

40-60VDC

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46

Pas de commentaire

Allied-telesis AT-MCR1 Manuel d'utilisateur Page 39