Allied-telesis AT-MCR1 Manuel d'utilisateur télécharger pdf (Page 25)

AT-MCR1 Media Converter Chassis Installation Guide

Installing the Chassis On a Table or Desktop

(AC Models Only)

To install the chassis on a table or desktop, perform the following

procedure:

1. Turn the AT-MCR1 chassis over.

2. Attach the four protective rubber feet to the bottom of the

chassis, as shown in Figure 7.

Figure 7. Attaching the Rubber Feet

3. Turn the chassis over and place it on a flat and secure

surface, leaving ample space around the chassis for

ventilation.

The chassis is ready for cabling and powering up.

 For cabling instructions, refer to the installation guide that

comes with the Allied Telesis media converter.

 For powering up instructions, refer to “Powering On an AC-

Powered Chassis” on page 34.

1051

PWR

1000Ba

AT-MC100

8/GB

IT E

RTER

AUTO M

I/M

I-

1000Ba

se-T

PWR

LINK

ACT

LINK

ACT

CLAS

S 1

LASER PRODUC

AT-M CR 1

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 45 46

Pas de commentaire

Allied-telesis AT-MCR1 Manuel d'utilisateur Page 25