Allied-telesis AT-MC106XL Manuel d'utilisateur télécharger pdf (Page 15)

AT-MC105XL and AT-MC106XL Installation Guide

Troubleshooting

To troubleshoot your media converter, perform the following:

1. Set the unit in the Link test Mode.

2. End stations used with the media converter must operate in the same

duplex mode (either both full-duplex or both half-duplex).

3. Verify that the twisted pair cable is Category 5.

4. Verify that proper fiber cable is being used: multimode for the

AT-MC105XL and AT-MC106XL.

5. Verify that the near end node transmitter (TX) is connected to the far end

node receiver (RX) and vice versa on the fiber segment.

Technical Specifications

Table 2 lists the media converter technical specifications

Table 2

Media Converter Technical Specifications

Specifications

Dimensions (W x D x H) 4.125 in x 3.75 in x 1.0 in (10.5 cm x 9.5 cm x 2.5 cm )

Max. Operating temperature 0° C to 40° C (32° F to 104° F)

Max. Storage temperature -20

C to 80

C (-4° F to 176° F)

Operating altitude up to 10,000 ft (3,048 m)

Humidity 5% to 80% (noncondensing)

EMI/RFI meets FCC Class A, EN55022 Class A

Safety EN60825

EN60950

Immunity EN50082-1 Immunity Standard

Power

Input supply voltage

Max. current

Power consumption

12 V DC +/-5%

500 mA

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Pas de commentaire

Allied-telesis AT-MC106XL Manuel d'utilisateur Page 15