Allied-telesis AT-CV1000 Manuel d'utilisateur télécharger pdf (Page 32)

Chapter 3: Installation

Installing a Converteon™ Line Card

To install a Converteon™ line card, perform the following procedure:

1. Remove the Converteon™ line card from its shipping package and

store the package in a safe place.

Note

You must use the original package if you need to return the unit to

Allied Telesis.

2. Loosen the captive screw to remove the AT-CV5PNL1 blank slot cover

from the AT-CV1000.

Keep the blank slot cover in a safe area in case you remove the line

card. The blank slot cover is used to keep dust from getting into the

chassis and maintains proper airflow, cooling, and ventilation through-

out the chassis.

3. Set the line card’s DIP switches.

For more information on the DIP switch settings, refer to the

Converteon™ Media Converter Line Cards Reference Guide.

Caution Be sure to observe all standard electrostatic discharge

(ESD) precautions, such as wearing an antistatic wrist strap, to

avoid damaging the device. A line card can be damaged by

static electricity.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

Pas de commentaire

Allied-telesis AT-CV1000 Manuel d'utilisateur Page 32