Allied-telesis AT-CV1000 Manuel d'utilisateur télécharger pdf (Page 27)

AT-CV1000 One-Slot Chassis Installation Guide

6. Install two plastic anchors and two screws onto the wall, as illustrated

in Figure 9.

Figure 9. Installing the Plastic Anchors and Screws Onto the Wall

7. Position the chassis vertically onto the wall screws, as illustrated in

Figure 10, and slide it down to secure the brackets against the wall.

Figure 10. Positioning The AT-CV1000 Chassis Onto the Wall Screws

8. Cable the line card according to the instructions that were shipped with

the line card.

9. Power on the chassis according to the instructions in “Powering On an

AT-CV1000 Chassis” on page 35..

-CM202

T-C

295

ASS

ASE

40-60VDC INP

LK AT FD

SML ML

OAM

296

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 41 42

Pas de commentaire

Allied-telesis AT-CV1000 Manuel d'utilisateur Page 27